I am having a problem that I thought I had resolved using this adapter on a Dell E7240 latop. When the lid is closed, the adapter turns off/disables. This is on a Windows 7 Pro 64 Installation. The action for lid close, battery/powered is do nothing. The adapter is set to not allow computer to power down adapter (box not checked). I do have a Proset Profile. When I first realized this was occuring, I went through the settings and changed power, in Proset to PSP CAM. This did seem to address the problem after reboot and continued to work, but something seemingly has changed. I did review all of the settings mentioned and re-applied the profile, but the adapter still turns off/disables immediately when the lid is closed. I do not think that this is a bug in the driver since I did get it to work and am running the latest driver according to the intel driver check utility and also latest Proset. Neither the driver nor Proset has been updated. I appreciate thoughts as to what else might be causing these or methods to debug/test.
Thank you as Intel Support indicated that I need to post here. Rep did not seem to even know what I was talking about.e